SH Figuarts Turtle figures

[Coro]

I am pretty sure the guy that was in charge of posing him just screwed up. Its a shame too cause I think it will put people off of him because of it.

I am sure the official photos will make the helmet look fine. That display reeks of the cap pushing up on the back of the helmet and screwing everything up.

[Lil Karai]

Originally Posted by tmntfannumerouno

Lets think about this did they say three new sculpted or just three "new" finished. I'm guessing the first will be for there 1/4 movie line, second will be a toon repaint, third is a bit harder to figure out.

Now lets think about it from your perspective. The first will be the 1/4 shredder, second is a new toon sculpt, third is ???.

My interest is slightly peaked but I'm still doubtful.

Im gonna move this discussion to the NECA speculation thread.

[Candy Kappa]

I did a height comparison picture, with Revoltech Leo, SH Figuarts Michael Jackson, NEVA Shredder and Marvel Legends Daredevil.



MJ is the only other SHF I have that isn't a Turtle or a Mario Bros, Leo is a bit on the large size, but I don't know how the Real-Life Person SHF figures measures in scale compared to other SHF figures, I know that the Bruce Lee SHF figure is really short at 5.5".

And a picture of Raph wearing a coat from a old Sting Wrestling figure.



Took a quick time down the storage locker and tested Toybiz Marvel Legends Beast's labcoat and box-set Gambit's trenchcoat. The labcoat was an obvious fit, cause Beast is... a beast lol, he's a big figure, so the coat was a bit big, but with some cutting and sewing and maybe a belt it'll be fine.

Gambit's coat on the other hand did not fit, I did manage to get both arms inside the coat arms, but the coat is way too small since Gambit is a anorexic figure and Raph got a huge shell. There even got a small tear in the coat from trying to wedge Raph in there, maybe the single Gambit's coat can fit better since it's cloth and not fake leathery material.



I don't have a fitting hat, SHF Michael Jackson's hat is white and way too small for the SHF Turtles

[calmik]

does anyone have any figure stands that work with these figures?

Kinda like this one (i am not sure if these work)

https://www.amazon.com/dp/B003AH6EVY...I21D1I6HFPWG90

[Candy Kappa]

any of the Bandai Tamashii stands with a C clamp should hold them.

[Coro]

Originally Posted by calmik

does anyone have any figure stands that work with these figures?

Kinda like this one (i am not sure if these work)

https://www.amazon.com/dp/B003AH6EVY...I21D1I6HFPWG90

I have a bunch of stand varieties in my store under the "stands and effects" section. I am not the lowest price, but you can get an idea of what is out there as far as options go. All my stands work with Legends, but there really arent any clasp points on the Figuarts turtles because the shell is so big around. If you dont mind grabbing them on the thigh or neck they would work I think. Let me know the exact combo you are curious about and I will give them a try. I have all the options on hand.

[calmik]

Originally Posted by Coro

I have a bunch of stand varieties in my store under the "stands and effects" section. I am not the lowest price, but you can get an idea of what is out there as far as options go. All my stands work with Legends, but there really arent any clasp points on the Figuarts turtles because the shell is so big around. If you dont mind grabbing them on the thigh or neck they would work I think. Let me know the exact combo you are curious about and I will give them a try. I have all the options on hand.

i like the 3 figure stand. maybe one standing in front and the other 3 jumping like they are attacking or something?

[theassassin]

So I'm guessing since I haven't seen it mentioned anywhere, there was no news about the future of the line given at Toyfair? Obviously we saw Shredder again, but even if we didn't see any other new figures, I was hoping to at least get confirmation that they were planning to do more. Splinter would be the obvious next choice.

But I guess it could be just that none of the journalists there were enough of a TMNT fan to ask the Tamashii Nation reps about it.

[Powder]

Nothing new was shown or spoken of, right.

[Huzzah]

We'll probably not get more info when Tamashii has their show in Japan. Or...maybe not..,

[inaheap]

I figure it will be at least until Shredder is up for order. Isn't that about when we first heard about Shredder?

[joefsas]

Are these figures likely to rocket in price after a while? I'm thinking of selling off some of my collection to fund these, but I fear its gunna take some time to do so.
Would hate to get that far and find I can no longer afford them...
Also, how do they scale with the party wagon?

[tmntfannumerouno]

Originally Posted by joefsas

Are these figures likely to rocket in price after a while? I'm thinking of selling off some of my collection to fund these, but I fear its gunna take some time to do so.
Would hate to get that far and find I can no longer afford them...
Also, how do they scale with the party wagon?

They look good in the pics I've seen but I would be afraid of paint rub.

[Huzzah]

They're too large for the Party Wagon, at least for practical use, they wouldn't fit comfortably, though it works as a background prop however. A lot of the other vehicles work well with them. The Cowabunga Carl Van is perfect fit however.

[joefsas]

It would be more of a background prop, yeah. Cheers guys

[Candy Kappa]

In the quest for a fitting coat for the Turtles, if you got $80 to spare, Mezco's One:12 Collective Old Man Logan got a leather coat.

Spoiler:

[Huzzah]

Have you tried Marvel Legends Trenchcoat Thing? He's not too expensive and some of them still have the fedora Thing wore.

[Candy Kappa]

No, I don't own a ML Thing, but I did mentioned him in a older post when finding fitting coats and hats for the Turtles, the fedora is probably the best one for a 1:12th figure. Donno about the coat, but it looks like it's very similar to Beast's lab coat which is a bit on the big side for a SHF Turtle.

I think one of the Marvel Legends Punisher comes with a soft goods coat too, but it's probably black.

[Huzzah]

I think the trench that comes with the movie version is a bit more fitted, but I don't have one in hand to judge, just from looking at photo, s with could be wrong.

[TCRI]

I got an Ikea Synas box - really nice actually. Keeps the dust off.

Made me think about a diorama using this as reference: