The Technodrome Forums

The Technodrome Forums (http://forums.thetechnodrome.com/index.php)
-   TMNT Comic Discussion (http://forums.thetechnodrome.com/forumdisplay.php?f=18)
-   -   Issue #2 (Mirage) 2nd printing (http://forums.thetechnodrome.com/showthread.php?t=47908)

Cheesebrush 06-24-2014 04:22 PM

Issue #2 (Mirage) 2nd printing
 
Need some help in determining if my copy of issue #2 Mirage 2nd printing is real or fake. I've had it for ages and bought it with a few other issues which all seem genuine. I've never seen another copy in person to compare it to.

The main issue I have is that the cover is matte paper rather than the glossy paper used on the other issues. Comparing to photos online it's hard to tell what it should be. Also some of the artwork on the internal pages is printed too close to the top of the page - 2 or 3 of the pages seem to be slightly cropped at the top (or the artwork actually touches the top edge).

The different cover paper alone is enough to make me think fake but I just want to double check!

Can post pictures if necessary. Thanks for any help.

Fearing 06-24-2014 11:06 PM

My copy has the same matte finish. Not sure about the interior pages as it's been a long while since I've looked at it. I'll have to dig it out and check on that.

Powder 06-24-2014 11:38 PM

Quote:

Originally Posted by Fearing (Post 1291035)
My copy has the same matte finish. Not sure about the interior pages as it's been a long while since I've looked at it. I'll have to dig it out and check on that.

This exactly. :trazz: I had Kevin Eastman sign my copy & he didn't say anything, if that's a credit to it at all.

Mayhem 06-25-2014 05:15 AM

I have both first and second prints at home, I'll try to remember to compare them tonight...

Sofistocat 06-25-2014 08:25 AM

both 1st and 2nd printings of issue 2 had matte cover paper. The 1st printings are a tad bit larger than the 2nd prinitngs. This is a similar effect to the size difference between the 1st/2nd printings and the 3rd printings of issue 1. Also, I've found that the blue color on the cover is a deeper darker color on the 2nd printings. I see it most apparent in the color transtion areas of the Mouser's upper and lower jaws. It's a more faded blue color on the 1st print in comparison.

The inside cover should also have a 2nd printing word bubble inside the panel with Leo.

edit: it's a known fact this issue had big cropping issues at the printer

Chuquison 06-25-2014 01:21 PM

Quote:

Originally Posted by Cheesebrush (Post 1290682)
Need some help in determining if my copy of issue #2 Mirage 2nd printing is real or fake. I've had it for ages and bought it with a few other issues which all seem genuine. I've never seen another copy in person to compare it to.

The main issue I have is that the cover is matte paper rather than the glossy paper used on the other issues. Comparing to photos online it's hard to tell what it should be. Also some of the artwork on the internal pages is printed too close to the top of the page - 2 or 3 of the pages seem to be slightly cropped at the top (or the artwork actually touches the top edge).

The different cover paper alone is enough to make me think fake but I just want to double check!

Can post pictures if necessary. Thanks for any help.

from my understanding best way to figure it out is open the book and if you see a turtle in the inside cover with a peace sign holding two fingers its a 2nd print.... that's what I was told since I have the same copy you speak of.

Cheesebrush 06-25-2014 03:34 PM

Thank you for all the replies. Sounds like I probably have a genuine copy after all. Wonder why just this issue used a different, non-glossy paper for the cover - it really stands out from all the others (but not in a good way!)

Maybe I'll try asking Peter Laird next time he does one of his "Ask me anything" posts on his blog, although it's unlikely anyone would remember such trivial details from 30 years ago...

Sofistocat 06-25-2014 04:40 PM

Laird pretty much remembers everything. Pretty sure it was a production cast issue. Glossy paper was more expensive at the time.

Chuquison 06-26-2014 08:51 AM

Quote:

Originally Posted by Sofistocat (Post 1291550)
Laird pretty much remembers everything. Pretty sure it was a production cast issue. Glossy paper was more expensive at the time.

Does laird ever do comic con. I cant find anything on him for schedules for possible signings? unless he doesn't do them anymore

coreyrc87 06-26-2014 09:02 AM

I've noticed another thing about the Mirage #2 2nd print... I've actually been meaning to post asking about it for a while, but forgot until I saw this thread.

I have three of them, all bought at different times and from different people. In all three, the last approximately 1/3 of the book has a tear at the bottom of every page that's about 1/4 inch tall and 1/16 inch wide. Is this a known issue with Mirage #2 second prints? I don't have a pic right now, but I can get one this evening. I have a first print as well that doesn't have this tear.

mrmaczaps 06-26-2014 12:06 PM

Quote:

Originally Posted by coreyrc87 (Post 1291957)
I've noticed another thing about the Mirage #2 2nd print... I've actually been meaning to post asking about it for a while, but forgot until I saw this thread.

I have three of them, all bought at different times and from different people. In all three, the last approximately 1/3 of the book has a tear at the bottom of every page that's about 1/4 inch tall and 1/16 inch wide. Is this a known issue with Mirage #2 second prints? I don't have a pic right now, but I can get one this evening. I have a first print as well that doesn't have this tear.

hmm, my second print isn't torn... poor storage and random happenstance on the copies you have maybe?

Cheesebrush 06-26-2014 02:11 PM

Well my now "more or less confirmed as genuine" copy also has these little tears at the bottom of the page. Starts on page 11, right in the bottom middle, then from pages 21-30 it changes to 3 tears in different locations along the bottom.

Also worth noting is that these tears also coincide exactly with the pages that are badly cropped at the top.

And "tears" is probably the wrong description - looks more like nicks in the paper.
If I was to guess, I would say they are part of the printing or paper production process and are usually cropped off leaving perfect pages.

I see the same sort of holes/nicks at the edges of newspapers I get all the time.

Mayhem 06-26-2014 02:50 PM

I checked my second print #1, no sign of the "tears" but I know what you are talking about, I'm pretty sure my #3 or #4 first prints have the same issue. My second print #1 however has a huge gap in the spine on the double page spread of 28 and 29 though. Bad printing there.

coreyrc87 06-26-2014 03:48 PM

Quote:

Originally Posted by mrmaczaps (Post 1292036)
hmm, my second print isn't torn... poor storage and random happenstance on the copies you have maybe?

I'd lean more toward random happenstance/something happening at the printer than poor storage. Two of mine are NM+ aside from the tears, so there weren't likely any real storage issues on those.

Quote:

Originally Posted by Cheesebrush (Post 1292114)
Also worth noting is that these tears also coincide exactly with the pages that are badly cropped at the top.

And "tears" is probably the wrong description - looks more like nicks in the paper.
If I was to guess, I would say they are part of the printing or paper production process and are usually cropped off leaving perfect pages.

I see the same sort of holes/nicks at the edges of newspapers I get all the time.

EXACTLY! Mine stick to one "tear" per page, but yeah, they do coincide with the badly cropped pages. And I guess you're right, they're more like nicks than actual tears.


All times are GMT -6. The time now is 02:48 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.