The Technodrome Forums

The Technodrome Forums (http://forums.thetechnodrome.com/index.php)
-   TMNT Movie Discussion (http://forums.thetechnodrome.com/forumdisplay.php?f=32)
-   -   Tom Spina Designs finished Raphael Head (http://forums.thetechnodrome.com/showthread.php?t=60244)

Bmaga123 07-20-2018 01:08 PM

Tom Spina Designs finished Raphael Head
 
4 Attachment(s)
Hello,

I just wanted to share pictures of my recently completed Raphael head based off the original 1990 movie design. He is not a 100% likeness to the movie but I think he comes really close! The latex head which is backed in foam lining was a blank I purchased from The Prop Shop Garage on Facebook that came with a set of lower teeth. IMO this company makes the most accurate heads based on the 1990 movie as far as sizing and likeness. I mailed the blank off to Tom Spina Designs who I felt was the perfect choice since they worked on restoring a couple original turtle suits. I basically paid them for full paint job, cloth bandana application and glass eyes as well as custom mask stand and display case. I have to say Tom Spina Designs is the most professional company I have ever worked with and the customer service is top notch. Thanks for looking :tcool:

Bmaga123 07-20-2018 01:09 PM

3 Attachment(s)
Couple more pictures

d_osborn 07-20-2018 01:13 PM

Spina is a legend! Super cool piece. 8)

Bmaga123 07-20-2018 03:22 PM

Quote:

Originally Posted by d_osborn (Post 1770179)
Spina is a legend! Super cool piece. 8)

Thanks buddy!

bwwd 07-20-2018 06:51 PM

So its replica, looks quite close, good colours, im sure they saved info about original suit colours and used them on it

Bmaga123 07-20-2018 06:56 PM

Quote:

Originally Posted by bwwd (Post 1770297)
So its replica, looks quite close, good colours, im sure they saved info about original suit colours and used them on it

Yes it's a replica and for sure they know the exact colors used which is one of the reasons I wanted them to take on this project. Thanks for commenting!

bwwd 07-25-2018 04:08 AM

Can You ask if they took casts of the tmnt costumes they had for restoration to create copies for themselves privately or they werent allowed to copy any costume ? I would do them anyway and wouldnt tell but maybe theyll be open about it , or they didnt do it cause arent huge fans.
Also how expensive it was ?
Maybe theyre in good contacts with Brian Henson and know what happened with original TMNT molds from 1st film ? Destroyed or stored in Henson warehouses ?

Bmaga123 07-25-2018 01:57 PM

Quote:

Originally Posted by bwwd (Post 1771067)
Can You ask if they took casts of the tmnt costumes they had for restoration to create copies for themselves privately or they werent allowed to copy any costume ? I would do them anyway and wouldnt tell but maybe theyll be open about it , or they didnt do it cause arent huge fans.
Also how expensive it was ?
Maybe theyre in good contacts with Brian Henson and know what happened with original TMNT molds from 1st film ? Destroyed or stored in Henson warehouses ?

They are very secretive about what materials were used on the original costumes and will not give any of that information away and trust me I tried to get it lol. The head blank cost me 300.00 shipped and Tom Spina charged me Just under 2,000 shopped for full finished head with glass eyes, custom stand and display case which is not seen in the pictures.

pferreira 07-26-2018 10:45 AM

Quote:

Originally Posted by Bmaga123 (Post 1770176)
Hello,

I just wanted to share pictures of my recently completed Raphael head based off the original 1990 movie design. He is not a 100% likeness to the movie but I think he comes really close! The latex head which is backed in foam lining was a blank I purchased from The Prop Shop Garage on Facebook that came with a set of lower teeth. IMO this company makes the most accurate heads based on the 1990 movie as far as sizing and likeness. I mailed the blank off to Tom Spina Designs who I felt was the perfect choice since they worked on restoring a couple original turtle suits. I basically paid them for full paint job, cloth bandana application and glass eyes as well as custom mask stand and display case. I have to say Tom Spina Designs is the most professional company I have ever worked with and the customer service is top notch. Thanks for looking :tcool:

Looks great. Am interested to see if you can get it running with the animatronics.

Bmaga123 07-26-2018 01:24 PM

Quote:

Originally Posted by pferreira (Post 1771330)
Looks great. Am interested to see if you can get it running with the animatronics.

Unfortunately not this is display only plus it's not the correct material for animatronics.

bwwd 07-27-2018 03:28 AM

foam latex was used on suits, its basically sponge/ foam that wraps around muscles of actors like a glove and latex is on top.You can do this material yourself, there are some tuts on youtubes, its very lightweight and it bends like a sponge.
Thats why some turtles suits from regular silicone or latex look bad because its just thin layer of latex without sponge in it to wrap around muscles skingtight.
BUT big issue with latex is that it degrades when exposed to sunlight , yea it sucks a lot, so in many cases silicone is much better cause its veru durable no matter what weather it is and can withstand high temps even close to 200C.
Im wondering myself if anyone tried to do foam silicone cause it exists.Latex is used for a reason as well, it degrades so new parts have to be made which means more money have to be spend... you know what i mean?


All times are GMT -6. The time now is 01:19 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.