Custom Warrior Rahzar with Fur

***First of Two Latin Kings*** · 05-31-2007, 11:12 AM

I made this for my friend tokKa of www.terrible2z.com:

http://flickr.com/photos/terrible2z/520617447/

*Revan* · 05-31-2007, 01:25 PM

Ha I don't get it. Did you just glue some hair onto a Rahzar figure

*VaughnMichael* · 05-31-2007, 06:15 PM

Quote:

Originally Posted by Neutrino

Ha I don't get it. Did you just glue some hair onto a Rahzar figure

this figure was suposed to actully come out in the line but never did same goes for a red and gold version of robotic bebop.
I have all the other figures back home in los angeles they're some of my fave figures.
btw I made my own custom warrior rahzar with fur also was allot of fun I also made a samurai tokka to go along with him.

*shuriken* · 05-31-2007, 11:26 PM

Hmm...never heard of a fuzzy Rhazar toy. Kinda funny now that I think about it.

*VaughnMichael* · 06-01-2007, 01:23 AM

Quote:

Originally Posted by shuriken

Hmm...never heard of a fuzzy Rhazar toy. Kinda funny now that I think about it.

Yeah it was suposed to come out in 1995 but I can asure everyone it did not come out.

*tOkKa* · 06-01-2007, 04:45 AM

-->>

F5ckin' rawks..

..yeh it looks like Ceej used a hot glue gun .. wrapped him up like a furry burrito ..n' blammo .. .. the car-grill chestplate is glued outside of the fur so it wiggles around a little bit..

Quote:

Putrescent Quote:
Originally Posted by Neutrino
Ha I don't get it. Did you just glue some hair onto a Rahzar figure

this figure was suposed to actully come out in the line but never did same goes for a red and gold version of robotic bebop.
I have all the other figures back home in los angeles they're some of my fave figures.
btw I made my own custom warrior rahzar with fur also was allot of fun I also made a samurai tokka to go along with him.

-->> YOU ARE semi-REQUIRED TO SHOW ME THIS A.s.A.P. !! pleasepleasepleaaaaaaaaaaaaaaasssssssee//

***First of Two Latin Kings*** · 06-01-2007, 07:39 AM

Quote:

Originally Posted by Neutrino

Ha I don't get it. Did you just glue some hair onto a Rahzar figure

My father used to be a taxidermist...when tokKa told me he wanted a warrior Rahzar with Fur, I told him I'd make him one. My dad let me have some fur samples, and I picked some fur that looked most like the fur on the Rahzar in the prototype picture. I cut the sample into pieces shaped like the surfaces of Rahz's body, and hot-glued them on. It took about an hour.

*odupianist* · 06-01-2007, 08:20 AM

Quote:

this figure was suposed to actully come out in the line

I've heard the same thing. I think there's a pic at ninjaturtles.com. Maybe that's where I saw it.

*VaughnMichael* · 06-01-2007, 04:14 PM

Quote:

Originally Posted by odupianist

I've heard the same thing. I think there's a pic at ninjaturtles.com. Maybe that's where I saw it.

yep and I've been tryiong to get dan to take it down for years but he wont listen to me.
He also keeps saying he's going to do a section on the site for proto types and unreleased figures but he's been saying that for years.

OA · 06-01-2007, 05:05 PM

Theres gotta be at least a handful of protos of the real thing floating around out there...

TMNTGal · 06-01-2007, 08:43 PM

Great Rahzar. I like the different fur you used. All the cutting and gluing must have taken a while. I went the easy way with mine. I made a pattern that needs minimal sewing and you slip the figure inside. A hood goes over his head with little holes so you can still see his ears. I didn't have the guts to hot glue my figure as it was the only loose Rahzar I had at the time.

I was also thinking of getting another loose Rahzar and flocking him. Though I still haven't found the particular type of flock I want to use.

If you have a pic post your too Putrescent.

*VaughnMichael* · 06-01-2007, 10:06 PM

sadly I dont think I have images of my warrior tokka and rahzar but I did use grizzlors fur n my rahzar lol I mean why not thats pretty much the idea playmates what ripping off.

*Ninjinister* · 06-01-2007, 10:45 PM

Quote:

Originally Posted by TMNTGal

I was also thinking of getting another loose Rahzar and flocking him. Though I still haven't found the particular type of flock I want to use.

If you have a pic post your too Putrescent.

I'm not normally the perverted type, but that sounds dirty -_- What is flocking?

*Roseangelo* · 06-01-2007, 10:47 PM

I want a fuzzy Rahzar!!

*VaughnMichael* · 06-02-2007, 01:42 AM

Quote:

Originally Posted by The S

I'm not normally the perverted type, but that sounds dirty -_- What is flocking?

Flocking is what they do to the muppets so they have the look that they do...but not many people know this.
Also do you remember the movie star splinter action figure that was fuzzy...yeah thats flocking.

Quote:

Originally Posted by Roseangelo

I want a fuzzy Rahzar!!

I'[ll send my step dad right on over hahahahahaha

*Roseangelo* · 06-02-2007, 01:48 AM

Quote:

Originally Posted by Putrescent

I'[ll send my step dad right on over hahahahahaha

Yeah, think I'll pass on that one.

*VaughnMichael* · 06-02-2007, 03:23 AM

Quote:

Originally Posted by Roseangelo

Yeah, think I'll pass on that one.

ahahah yeah ok I'm getting a bad mental picture of him going mo ma? to you hahaha

*Buslady* · 06-02-2007, 10:38 AM

Quote:

Originally Posted by The S

I'm not normally the perverted type, but that sounds dirty -_- What is flocking?

you know that short, stiff

fuzzy stuff you find on some toys? that's flocking. they do it to xmas trees too. movie 1 splinter, there was a fuzzy flocked version. I got one. silly cheap horse toys are also flocked and feathered manes & tails...

*VaughnMichael* · 06-02-2007, 02:41 PM

Quote:

Originally Posted by Buslady

you know that short, stiff

fuzzy stuff you find on some toys? that's flocking. they do it to xmas trees too. movie 1 splinter, there was a fuzzy flocked version. I got one. silly cheap horse toys are also flocked and feathered manes & tails...

Why did you find it necessary to post this when I already said the same thing?

*Ninjinister* · 06-02-2007, 05:04 PM

Quote:

Originally Posted by Putrescent

Why did you find it necessary to post this when I already said the same thing?

Maybe because of the innuendo? And further clarification. Between the two explanations, I have a splendid idea what flocking is.

05-31-2007, 01:25 PM	#2
Revan Han Shot First Join Date: Feb 2006 Location: Paper Street Soap Company Posts: 3,687	Ha I don't get it. Did you just glue some hair onto a Rahzar figure __________________

05-31-2007, 11:26 PM	#4
shuriken Second City Shinobi Join Date: Jul 2005 Location: Chi-town Posts: 4,182	Hmm...never heard of a fuzzy Rhazar toy. Kinda funny now that I think about it. __________________ Some things are better left unsaid. This isn't one of them

06-01-2007, 05:05 PM	#10
OA Scatter the nuns!! Join Date: Oct 2003 Posts: 3,981	Theres gotta be at least a handful of protos of the real thing floating around out there... __________________

06-01-2007, 08:43 PM	#11
TMNTGal Mad Scientist Join Date: Nov 2002 Posts: 1,061	Great Rahzar. I like the different fur you used. All the cutting and gluing must have taken a while. I went the easy way with mine. I made a pattern that needs minimal sewing and you slip the figure inside. A hood goes over his head with little holes so you can still see his ears. I didn't have the guts to hot glue my figure as it was the only loose Rahzar I had at the time. I was also thinking of getting another loose Rahzar and flocking him. Though I still haven't found the particular type of flock I want to use. If you have a pic post your too Putrescent. __________________

06-01-2007, 10:47 PM	#14
Roseangelo Emperor Join Date: Dec 2002 Location: California Posts: 9,119	I want a fuzzy Rahzar!! __________________ www.ninjapizza.net www.colorsbyrosemary.com

06-01-2007, 10:06 PM	#12
VaughnMichael I'm Baaaaaaccck! Join Date: Sep 2003 Location: Pittsburgh, PA Posts: 11,833	sadly I dont think I have images of my warrior tokka and rahzar but I did use grizzlors fur n my rahzar lol I mean why not thats pretty much the idea playmates what ripping off.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode